Buzz Feiten Tuning System BFTS

[tom]

front edge of nut to center of first fret is 1.4", standard is 1.431". you should also notice that the nut mounting screw holes would have to be a little oval shaped. when we do it here, we plug the original holes from the top, then alter the holes one the back side, making them a little oblong shaped.

[Petri358]

Sweet top!!!

Grand Am, no top

[Petri358]

front edge of nut to center of first fret is 1.4", standard is 1.431". you should also notice that the nut mounting screw holes would have to be a little oval shaped. when we do it here, we plug the original holes from the top, then alter the holes one the back side, making them a little oblong shaped.

Thanks for the info. I'll measure that af first thing.
Are you sure that it's not some early day one off from your factory?

[tom]

we didn't hear about the system till '96, so unless we were cruising in the delorean, it had to be done later.

[Petri358]

No flax capacitor then?

[Petri358]

Does the number on the BF sticker reveal something like who, when....

[tom]

not that I know of, looks like a sticker that retrofitters wood use.