mbrown3
07-30-2007, 03:08 PM
OK all, with confirmation this morning that my wife is pregnant, I think it's time to sell of some gear. I figured the birth of my firstborn would be time to seriously pare down some stuff, and I'll get a jump on it here. I love this guitar but have to put family first! Hopefully I'll be able to replace it someday, maybe even with some custom options. Off to ebay tomorrow, but figured I'd give you all a heads up just in case. $1800, plus paypal fee and $35 for shipping.
Mcinturff Taurus Standard #10110
EXCELLENT Condition - most blemishes are in the photos, but it is certainly "played in". Hi-res photos can be sent if requested.
General Taurus Standard Specs:
Offset single cutaway design
One piece Honduras mahogany neck.
One piece Honduras mahogany body.
Body thickness (1-3/4" back and 5/8" top)
East Indian rosewood fretboard
Set in mortise and tenon neck/body joint
Joins at the 19th fret on treble side, 16th fret on the bass side
25-1/8" Scale length
1-11/16" Nut width
12" radius arch
22 frets, medium jumbo
17 degree headstock pitch
Curved, single action stainless steel truss rod
Additional graphite reinforcements
Unique shock protect circuit on bridge ground...Limits electric current at the strings in dangerous ground fault conditions.
Switchcraft ¼" panel style output jack
Body cavities coated with Acheson Electrodag 112 conductive shielding paint.
Nitro cellulose lacquer
Hand signed and numbered
This Guitar's Specifics:
Headstock: Matching 4A Maple, Paua Cover
Inlay: Paua Shell Crest
Nut: Self lubricating composite
Neck Carve: Mild V
Body: Solid Mahogany
Top: 4A Maple-Flame
Electronics: HB/HB - 5 Way
Finish: Bursts - Deluxe Amberburst
Hardware: Chrome
Bridge: Tune-o-matic & Stop Tail Piece
Chambered: Yes
http://www.abc-usa.org/documents/mdb/taurus1.jpg
http://www.abc-usa.org/documents/mdb/taurus2.jpg
http://www.abc-usa.org/documents/mdb/taurus3.jpg
http://www.abc-usa.org/documents/mdb/taurus4.jpg
http://www.abc-usa.org/documents/mdb/taurus6.jpg
http://www.abc-usa.org/documents/mdb/taurus7.jpg
http://www.abc-usa.org/documents/mdb/taurus10.jpg
Mcinturff Taurus Standard #10110
EXCELLENT Condition - most blemishes are in the photos, but it is certainly "played in". Hi-res photos can be sent if requested.
General Taurus Standard Specs:
Offset single cutaway design
One piece Honduras mahogany neck.
One piece Honduras mahogany body.
Body thickness (1-3/4" back and 5/8" top)
East Indian rosewood fretboard
Set in mortise and tenon neck/body joint
Joins at the 19th fret on treble side, 16th fret on the bass side
25-1/8" Scale length
1-11/16" Nut width
12" radius arch
22 frets, medium jumbo
17 degree headstock pitch
Curved, single action stainless steel truss rod
Additional graphite reinforcements
Unique shock protect circuit on bridge ground...Limits electric current at the strings in dangerous ground fault conditions.
Switchcraft ¼" panel style output jack
Body cavities coated with Acheson Electrodag 112 conductive shielding paint.
Nitro cellulose lacquer
Hand signed and numbered
This Guitar's Specifics:
Headstock: Matching 4A Maple, Paua Cover
Inlay: Paua Shell Crest
Nut: Self lubricating composite
Neck Carve: Mild V
Body: Solid Mahogany
Top: 4A Maple-Flame
Electronics: HB/HB - 5 Way
Finish: Bursts - Deluxe Amberburst
Hardware: Chrome
Bridge: Tune-o-matic & Stop Tail Piece
Chambered: Yes
http://www.abc-usa.org/documents/mdb/taurus1.jpg
http://www.abc-usa.org/documents/mdb/taurus2.jpg
http://www.abc-usa.org/documents/mdb/taurus3.jpg
http://www.abc-usa.org/documents/mdb/taurus4.jpg
http://www.abc-usa.org/documents/mdb/taurus6.jpg
http://www.abc-usa.org/documents/mdb/taurus7.jpg
http://www.abc-usa.org/documents/mdb/taurus10.jpg