two position switches?

[GaryMcT]

What do you guys recommend for switches that are the same form factor and threads as the switcheroo switches? The blower in particular is what I'm looking for. . . 2 positions, 4 poles (could probably get away with less poles.) Since I have singles in the neck and middle position, I might want to rewire without the switcheroo circuit board to just have 2 position switches there.

Thanks!

[tom]

what do the switches need to do?

[GaryMcT]

1) neck switcheroo switch: turn neck single off/on with ground redirected to backplate virtual ground 1
2) middle switcheroo switch: turn middle single off/on with ground redirected to backplate virtual ground 1
3) bridge switcheroo switch: turn bridge humbucker off/split with ground redirected to backplate virtual ground 2
4) blower: when on, series bridge using non-backplate ground with vintage voicing

Do split humbuckers still want to see a 250K pot?

[tom]

so you'll be ditching the pc board. i'd contact suhr since they are the ones selling the scc. they should have diagrams to do what you want. yes, split humbuckers like the 250k pot or vv.

[GaryMcT]

Cool. . thanks.