Looking for neck dimensions on TA website

[Jason Penn]

Can somebody post a link to the neck dimensions on the TA website. I ran up on it once but now I can't seem to find it. Thanks

[slowburn]

I have some on my harddrive, (don't like the v-shapes, so I don't have those)

someone correct me if these are wrong:

ta standard (.06 taper) 0.810 0.870
62 roundback 1 5/8 (.125 taper) 0.830 0.955
62 roundback 1 11/16 (+.02) 0.850 0.975
cobra standard (.09 taper) 0.825 0.915

[joe1962]

Here's what I have:

We have three basic neck profiles:

Tom Anderson Standard: our most popular neck profile is a slim, sleek silhouette with not a lot of depth change from the nut to the 12th fret. they start off .810" thick at the first fret, and have about .06" worth of taper. It is offered in two nut widths, 1 5/8" and 1 11/16". And if you prefer the feel of a bigger neck, we offer this same silhouette increased in depth by +.030, +.050, +.070 or +.100 of an inch.

62 Round Back: Slightly deeper than the Tom Anderson Standard at the nut, it starts at .830" thick at the first fret, it has quite a bit of depth change (taper) from nut to 12th fret, about .125". It is offered in two nut widths—1 5/8" and 1 11/16". The 1 11/16" also has a +.020 of-an-inch deeper backshape than the 1 5/8" version.

50’s V: is a "V" backshape. It is offered in two depths, small and large and one nut width—1 5/8". The small V is .850 at the first fret and goes up to .910" at the body joint, and is a soft V. the large V is .900" at the first fret, and about .970" at the joint, and is a sharper V.

Cobra Necks: We have 3 neck backshapes for our shorter, 24 ¾-inch scale length, Cobra.

Cobra Standard: Our most popular Cobra neck backshape is a medium depth backshape for just the perfect "not too big and not too small but just right" neck. It measures about .825 at the first fret, and has .09" taper.

TA CO: T/A Standard for Cobra. Same dimensions as our TA standard long scale neck.

62 Cobra: Our 62 Roundback, 1 11/16" silhouette for Cobra. same size as the 1 11/16" long scale neck.

[Jason Penn]

Thanks for help everyone!